Interface 1010T

The Interface 1010T™ #992-00126 (992-126) is a perfect potentiostat for use in undergraduate and graduate teaching labs. Key features include:
1. Maximum Current - ± 100 mA 2. Maximum Applied Potential - ± 5 V 3. EIS - 10 μHz - 20 kHz

The Interface 1010T is an entry-level potentiostat designed for undergraduate and graduate teaching labs.  It provides all of the capabilities needed for getting students introduced to physical and analytical electrochemistry.  It even provides for potentiostatic EIS up 20 kHz.  

See the Specifications tab for the instrument specifications.  The Interface 1010T can be upgraded to a fully-featured Interface 1010E with an infield upgrade.  This allows you to get a low-cost potentiostat for teaching purposes that can later be upgraded to a fully-capable research-grade potentiostat able to perform experiments for a wide variety of applications.  

SYSTEM

PotentiostatYes
GalvanostatYes
Zero Resistance AmmeterYes
Floating (Isolated from Earth Ground) Yes
Cell Connections2, 3, or 4
Maximum Current± 100 mA
Current Ranges6 (1 uA – 100 mA)
Current Ranges
(including internal gain)
8 (10 nA – 100 mA)
Minimum Current Resolution0.3 pA
Maximum Applied Potential± 5 V
Rise Time<1 μs
Minimum Time Base1 ms
Noise and Ripple<20 μV rms
Weight2.4 kg
Dimensions24 (W) x 6 (H) x 27 (D) 27 cm
  

CONTROL AMPLIFIER

Compliance Voltage±20 V (@ 1A)
Output Current>±1 A
Speed Settings5
Unity Gain Bandwidth980, 260, 40, 4, 0.4 kHz
  

EIS MEASUREMENT

EIS10 uHz – 20 kHz
EIS Accuracy99%
AC Amplitude2.33 V maximum
17.8 μV minimum
  

ELECTROMETER

Input Impedance>1012 Ω
Input Current (typical)<20 pA
Bandwidth>10 MHz
CMRR>80 dB (10 kHz)
>60 dB (1 MHz)
  

POTENTIAL

Applied Accuracy   ±1 mV ±0.2% of setting
Applied Resolution200 μV, 50 μV, 12.5 μV/bit
Measured Accuracy±1 mV ±0.3% of reading
Measured Resolution1 μV, 10 μV, 100 μV, 400 μV/bit
  

CURRENT

Applied Accuracy   ±5 pA ±0.3% of range
Applied Resolution0.0033% full-scale/bit
  

MEASURED CURRENT

Measured Accuracy±5 pA ±0.3% of range
Measured Resolution0.0033% full-scale/bit
Bandwidth>10 MHz (1A – 100 μA)
>1.5 MHz (10 μA)
>0.15 MHz (1 μA)

Materials Included 

Below is a table of all materials Gamry Instruments supplies in the Laboratory Course in Electrochemistry to perform all eleven experiments for ten pairs of students.

Part number

Description

Quantity

 
820-00005Sample of mild steel30
930-00015Ag|AgCl reference electrode1
932-00024Platinum working electrode1
932-00009Platinum microlectrode1
935-00065Micro stirring bar1
935-00123Carbon screen-printed electrode36
935-00124Platinum screen-printed electrode60
972-00065Cuvette cap1
987-00099DigiElch student edition1
988-00049Student edition book20
988-00050Teacher edition book1
990-00193Dr. Bob’s Cell kit1
990-00195Polishing kit1
990-00196EuroCell kit1
990-00419AC Dummy Cell1
990-00420Screen-printed electrode cell stand for 4 mm banana plugs1
990-00421Screen-printed electrode adapter for 4 mm cable1

By | Agencia Visión Digital

Ubicación:

Carrera 10 # 21-15 edificio Invertobón - Oficina 406 Pereira, Colombia

Contacto:

310 404 3123

Correo electrónico:

gerencia@hi-techautomatizacion.com.co / hi-tech14@une.net.co

Abrir chat
¿Cómo podemos ayudarte?